Awesome Gryphon Tool Sale                                                                                           

Gryphon OMNI-2 Plus+ Diamond Wire Saw

The new Omni-2 Plus+ provides a performance upgrade for the popular Omni series of diamond wire saws. The new saw offers faster cutting and longer blade life compared to the older Omni-2.

The Omni-2 Plus+ retains the popular features of the Omni-2 such as being able to cut in any direction, the built-in water pump, and near-maintenance-free operation.

As an added bonus, the Omni-2 Plus+ is shipped with a complement of six diamond blades, an extra set of blade guides and a spare chuck. It is unlikely that the operator of the Omni-2 Plus+ will need any additional parts or supplies for a very long time.

The Gryphon Omni saws use a very strong round steel wire blade that is coated all around with diamonds. The simple mechanism in the saw propels the blade up and down rapidly, enabling the operator to swiftly cut glass or other hard material. The simple design eliminates problems encountered in some other brands of saws that cause lost time, added maintenance expense and frustration.

The new Omni-2 Plus+ offers the best value today in glass cutting saws. You get a great saw for a low cost that now features much faster cutting, longer lasting blades, no expensive repair cost, is virtually maintenance free, and comes with 6 blades and all the extra accessories anyone would need.

Specifications: 5000 rpm - 1/4 hp - 19"x14"x13.5" Weight 18 lbs - Coolant: Recirculating Tap Water - 5 Year Warranty - Made in USA

# 08510   Gryphon Omni-2 Plus+ Diamond Wire Saw

List: $ 399.95     $ 299.95 ea.    Buy
that is a $100 savings!
 

	Part #	Description	Reg. Price
	# 08440	Turbo Fine Blades 120 grit (Pack of 3)	$ 23.50
	# 08450	Turbo Standard Blades 100 grit (Pack of 3)	$ 23.50
	# 08439	Replacement Chuck with Screw The Chuck consists of the entire white plastic part that slides up and down on the two vertical shafts. Use your old wrist pin to attach the Chuck to the connecting rod.	$ 7.95

The Gryphon Zephyr Diamond Ring Saw offers advantages not found in other glass saws.

The round blade can cut in any direction, and operation is very smooth and quiet. The Zephyr saw has a large work surface that is free of obstructions. The overhead blade support is slender, allowing the artist to have a very clear view of the material as it is cut. In addition, the Zephyr has a deeper throat and more clearance for the glass than other consumer glass saws.

Special attention has been given to designing the saw for quiet operation and for low maintenance. The critical moving parts are shielded to minimize the abuse from the glass dust that is generated when cutting. The highest quality bearings and wheels are used to extend the life of these critical parts.

The motor/blade assembly is a separate unit that can be removed from the base and used as a hand-held saw. This is useful for cutting items that cannot easily be brought to the table. A small water reservoir is built into the blade assembly housing and will hold enough water for a few minutes of hand-held cutting. When the saw is used in the normal configuration (installed in the base), the base will hold enough water for several hours of cutting.

The Gryphon Zephyr will cut glass, tile, rock and all other similar hard materials.

Specifications: 3000 rpm - 1/3 hp - 18"x18"x11" Weight 19 lbs - Coolant: Recirculating Tap Water - 1 Year Warranty - Made in USA

	Part #	Description	Reg. Price
	# 08516	Standard Diamond Replacement Blade	$59.95
	# 08521	Fine Dichroic Blade - for delicate work, leaves very smooth edge	$59.95
	# 08522	Separating Blade - enables making inside cuts without having a lead-in cut	$59.95

Gryphon C-40 Diamond Band Saw

The Gryphon C-40 Diamond Band Saw is the ideal tool for your difficult projects. It cuts as easily through heavily rippled glass as it does through the smoothest window glass. Those impossible cuts are made easy - simply guide the glass, and the saw does the rest. With our new high-speed motor, you will breeze though your projects at a surprisingly fast pace.

Highlights:
• You cut faster - the blade travels at 40 miles per hour
• Direct drive - no belts or pulleys
• New upper blade guide provides increased control while cutting
• New saw and wheel design reduces basic saw maintenance to near zero
• Huge water reservoir under the work surface
• Less waste because tighter blade tensioning allows more precise cutting
• One square foot of unobstructed work surface
• Blade Dimensions - 37 inches in diameter, .020 inches wide, .140 inches deep
• Tension Adjustment - Single knob - Semi-automatic

Specifications: 2850 rpm - 1/3 hp - 18"x18"x11" Weight 18 lbs - Coolant: Recirculating Tap Water - 1 Year Warranty - Made in USA

# 08400   Gryphon C-40 Diamond Band Saw

List: $ 379.95   $ 298.99 ea.    Buy
that is an $80.96 savings!

Gryphon Twister Convertible Grinder

Gryphon Slip-on Bits are the industry's easiest to change. The bits slip onto the shaft and held securely in place with a slight twist. To remove a bit, you simply lift it straight up. 1" and 3/4" bits are easily interchanged in seconds without tools or levers. Of course, you can also use any standard bit as well.

An automatic pump supplies a constant flow of water directly to the bit regardless of saw orientation. Because of the way the water is directed onto to the bit, there is virtually no splash. No sponge is required in this arrangement, eliminating a common source of irritation.

Specifications: 3000 rpm - 1/5 hp DC - 13.5"x10.5" Weight 14 lbs - 5 Year Warranty - Made in USA

# 08549   Gryphon Twister Convertible Grinder

List: $ 199.95     $ 139.95 ea.    Buy
A $60 savings!

The Gryphon bits fit Inland, Glastar and Gryphon grinders.  They are a line of high quality grinding bits made in Germany by E. Herrmann, the same company that makes Gryphon's diamond band saw blades.