|
 Minor Bench Burner
This small stainless-steel surface mix bench-burner is designed for the artistic lampworker. Features easy tilt positioning.
Precision needle valves to regulate the fuel and oxygen flow. Uses propane, natural gas or hydrogen. The burner comes on a
heavy base with mounting holes. The burner can be removed from the stand and used as a hand torch. Recommended operating
pressures: .25 to 5 PSI of gas, 5 to 15 PSI of oxygen. (Requires hose # 9-40513)
Flamework in both Borosilicate and Italian Moretti Glass with the Minor!
Make professional quality beads in a fraction of the time: hollow beads, blown beads, murrine lampworked sculptures,
hollow core vessels and more! This surface mix torch has easily adjustable control valves (see image below) making
it simple to regulate the oxygen and propane gas flow, which is ideal for detailing and reduction powders. If you're
ready to step your work up to the next level, this is the torch system for you!
|
# 9-40501 Minor Bench Burner $ 195.00
Buy |
|
# 9-40513 Hose Kit For Burner
$ 29.95
Buy |
|
|
Mid-Range Bench Burner
The next step up from a Minor. The added size creates a wider flame that can melt glass about three
times faster than the minor. (The midrange has 25 fuel ports and a much larger burner face than the minor.) This bench
burner is also a surface mix burner that can be used with either propane (2-6 psi) and oxygen (5 to 8 psi) or natural
gas (.25 to 2 psi) and oxygen (5 to 8 psi). Cleaning tool included.
# 9-40502 $ 299.00
Buy
|
|
 Major Bench Burner
The perfect dual
threat torch for people who want to work both soft and hard glass! The lower, major burner has a block in the middle
that provides a large and focused flame that's great for soft glass (Moretti) work. With 48 fuel
ports, the flame size is wide, hot, and burns clean, also making it perfect for borosilicate work. The top, minor
surface mix torch provides a secondary, lower temperature flame. Controlling the two burners is simple,
two sets of valves operate each independently. Both are surface mix burners that can be used with either propane
(2-6 psi) and oxygen (5 to 8 psi) or natural gas (.25 to 2 psi) and oxygen (5 to 8 psi).
# 9-40503 $ 439.95
Buy |
|
Fireworks Self-Igniting Torch
Designed exclusively for Fireworks, this unique torch has a self-igniting
on/off button that takes the fear out of lighting your torch.
A special regulator dial at the base of nozzle allows you to adjust airflow for truer, clearer and more vibrant colors.
Great for beginners. Use
with MAPP gas (found at most hardware stores)
# 5651 $ 32.95
Buy
|
Bottle Holder
Attach Fireworks unique one-piece bottle holder clamps on the edge of any table and fastens down. It holds Mapp
or Propane bottles securely in place without slipping or scratching while you fuse away.
# 5653 $ 7.95
Buy |
|
Get Comfortable at the Torch !
This innovative workstation features a universal torch clamp to hold your torch in place, plus fully adjustable wrist
and elbow rests designed to make fine detail work easier! It provides stability and reduces fatigue, allowing for a
longer, more comfortable time at the torch. Workstation can be adapted to any torch size, can be attached directly to
the work area, and is designed for a custom fit. 1/4" screw required.
Deluxe Butterfly Model Features:
·
Fire resistant stainless steel work surface
·
Elbow rests that can be rotated in and out for maximum comfort
·
Elbow pads that can be adjusted for lampworkers who work further in on the table,
or use large major burners
·
Easy portability with compact fold-up design
# 9-40539 $ 79.95
Buy
|
(800)462-1209