Hand Tools

Glass breaking pliers are used to break off pieces of glass that are too small for your fingers. Breaks glass at the score line. 1/2” flat smooth jaw.

The curved jaw applies equal pressure to both sides of the score line causing the score to 'run'. There is an adjustment screw on for adjusting to the glass thickness and amount of force needed to run the score. Just place the runners over the score mark on your glass and squeeze.

Lightweight running pliers made of high quality plastic. Breaks glass gently along the score line.

# RP-3    $ 3.99    Buy
 

Handy for trimming your copper foil where it may overlap when foiling. Great for cutting out stencils for etching.  5" aluminum handle.

# 12010     Razor Knife                   $ 1.99 each    Buy
# PRO-11  Extra Blades (5 Pack)    $ 1.29 each    Buy

5” Spring loaded lead Dykes. Diagonal cutting pliers with special flush-ground jaws to prevent distortion of came, cuts perfectly straight or at mitered angles.

# 730-8    Reg. $ 8.79   $ 5.95    Buy 

This cutter is designed to trim a quarter inch off of your stained glass pieces in order to allow room for cement or grout in your mosaic project.  It allows you to be able to make a mosaic out of any stained glass pattern and still have even seams.

# 15763  Mosaic Cutter                 $ 21.95 each      Buy
# 15762  Replacement Wheels      $ 14.95 each      Buy
 

A down to earth “How to Do It” book for cutting geometric shapes. The book contains 56 pages, over 100 detailed illustrations, and lots of little tips to save you time and effort when you’re cutting shapes. 

# 1570     $ 16.95     $ 12.95      Buy
 

For those of you who want an easy and accurate way to square up a piece of glass, cut identical strips, and score glass at any angle quickly and accurately.  The 24”x 16” score board will accept glass up to 14” wide by any length. Makes even the most frustrating tasks easy and simple. he Scoreboard includes a base bar across the bottom to support your glass, a cutter guide that pivots & locks in any angular position, and a stabilizer bar which holds the guide bar in a fixed position with no movement.

# 1574    $ 52.95     $ 49.95     Buy

The Inland Strip/Circle Maker™ is the fast and easy way to make accurate straight line cuts, create duplicate strips, and make perfect circles every time. Because it can be used with glass cutters, razor knives, and marking pens and pencils, it is the perfect design and construction tool for all of your hobby needs.  Cuts strips 5/16" to 11 1/4" wide. Cuts circles from 3" to 24 1/2" in diameter.

Consists of three pieces: A T-bar which includes 6 wheel turret, stripper base and circle cutter base. Cuts strips ½” to 12” and circles from 3” to 24”.

Now it’s easy to score perfect circles, no matter the size, every time. The Easy-Cut Lens Cutter is the perfect circle cutting tool. Cuts circles 3/8” to 5” diameter. Comes with 3 wheel cutter turret.

Used for cutting and fitting lead came in panel construction. Sharp thin blade to prevent lead from crushing. Perfect for the beginner.

Studios everywhere should not be without an abrasive stone for smoothing the rough edges of cut glass. Eliminates careless cutting of your hands from the razor edge left on your cut glass.

Quick easy way to square off a ragged glass edge. Just anchor the square’s base against your glass to precisely square pieces up to 12½” wide.

A rust proof aluminum alloy ruler that is backed with a cork strip to prevent the ruler from scratching your glass. Raised edge gives added protection against smearing and holds the ruler in place.

# 14700    $ 4.29     Buy

THE RULEX

Select angle, lock with allen wrench, and make accurate geometric shapes and frames, panel lamps and trapezoids. Works as a conventional square with edge stop, 16” cutting arm and adjusts from 0° to 135° angle. Size: 21” x 2⅞”.

# 14790    $ 15.99     Buy 

Aluminum miter box & razor saw used for cutting Zinc or Brass channel for framing, or bass tubes for jewelry boxes. Cuts 45° & 90°.

Easy to hold & economical, this brush is made with sturdy synthetic fill set in hardwood block, for easy cementing of lead panels. (2 sizes)

Hefty table brush with long bristles for sweeping glass slivers off of your work area.

Deep set quality bristles. Great for applying flux to your copper foil or lead came joints. 

WIRE WILLY BRASS BRUSH

Soft bristle wire brush that is perfect for removing oxidation from lead seams without scratching the surface of the glass.

# BR-4     $ 1.29    $ .99    Buy