4 Free Bits with purchase of Gryphon
Zephyr Ring Saw
Buy a Gryphon Zephyr Ring Saw between May
15th, 2013 and August 31st, 2013 and receive an assortment of 4 free
Gryphon Grinding Bits.
These bits fit all brands of grinders. Send
your completed coupon, proof of purchase, and a check to cover
postage to Gryphon, and you will receive your bits promptly by
return Priority Mail.
Gryphon has upgraded the Zephyr Glass Ring Saw to the Zephyr Plus! You get the Zephyr Ring Saw which includes a standard
blade plus a Free additional standard blade and a Maintenance Kit!
$ 454.85 Value for Only
$ 309.95
Shop and Compare, our price cannot be beat!
The Gryphon Zephyr Diamond Ring Saw offers advantages not found in other glass ring saws.
The round blade can cut in any direction, and operation is very smooth
and quiet. The Zephyr saw has a large work surface that is free of
obstructions. The overhead blade support is slender, allowing the artist
to have a very clear view of the material as it is cut. In addition, the
Zephyr has a deeper throat and more clearance for the glass than other consumer glass saws.
Special attention has been given to designing the saw for quiet
operation and for low maintenance. The critical moving parts are shielded
to minimize the abuse from the glass dust that is generated when cutting.
The highest quality bearings and wheels are used to extend the life of these critical parts.
The motor/blade assembly is a separate unit that can be removed from
the base and used as a hand-held saw. This is useful for cutting items
that cannot easily be brought to the table. A small water reservoir is
built into the blade assembly housing and will hold enough water for a few
minutes of hand-held cutting. When the saw is used in the normal
configuration (installed in the base), the base will hold enough water for several hours of cutting.
The Gryphon Zephyr will cut glass, tile, rock and all other similar
hard materials.
1 Standard Grit Ring Saw Blade is included.
For a limited time 1 Extra Standard Grit Ring Saw Blade is also included
plus 3 Yellow Grommets. A $70 bonus!
Specifications:
3000 rpm - 1/3 hp
- 18"x18"x11"
Weight 19 lbs - Coolant: Recirculating Tap Water - 3 Year Warranty
- Made in USA
Markstay II
- The Zephyr's Best Friend
Designed to preserve your mark on glass during cutting, sawing and
grinding. Washes off with soap & warm water or glass & flux
cleaners. Your mark will stay on the glass until you wash it off.
4 Free Bits with purchase of Gryphon Omni Wire Saw
Buy a Gryphon Omni Wire Saw between May
15th, 2013 and August 31st, 2013 and receive an assortment of 4 free
Gryphon Grinding Bits.
These bits fit all brands of grinders. Send
your completed coupon, proof of purchase, and a check to cover
postage to Gryphon, and you will receive your bits promptly by
return Priority Mail.
The new Omni-2 Plus+ provides a performance upgrade for
the popular Omni series of diamond wire saws. The new saw offers faster
cutting and longer blade life compared to the older Omni-2.
The Omni-2 Plus+ retains the popular features of the
Omni-2 such as being able to cut in any direction, the built-in water
pump, and near-maintenance-free operation.
As an added bonus, the Omni-2 Plus+ is shipped with a
complement of six diamond blades, an extra set of blade guides and a
spare chuck. It is unlikely that the operator of the Omni-2 Plus+ will
need any additional parts or supplies for a very long time.
The Gryphon Omni saws use a very strong round steel wire
blade that is coated all around with diamonds. The simple mechanism in
the saw propels the blade up and down rapidly, enabling the operator to
swiftly cut glass or other hard material. The simple design eliminates
problems encountered in some other brands of saws that cause lost time,
added maintenance expense and frustration.
The new Omni-2 Plus+ offers the best value today in
glass cutting saws. You get a great saw for a low cost that now features
much faster cutting, longer lasting blades, no expensive repair cost, is
virtually maintenance free, and comes with 6 blades and all the extra accessories anyone would need.
Specifications:
5000 rpm - 1/4 hp
- 19"x14"x13.5"
Weight 18 lbs - Coolant: Recirculating Tap Water - 5 Year Warranty - Made in USA
The Chuck consists of the
entire white plastic part that slides up and down on the two vertical
shafts. Use your old wrist pin to attach the Chuck to the connecting rod.
Markstay II
- The C-40's Best Friend
Designed to preserve your mark on glass during cutting, sawing and
grinding. Washes off with soap & warm water or glass & flux
cleaners. Your mark will stay on the glass until you wash it off.
- The Zephyr's Best Friend
(800)462-1209