Grinder Glastar

Glass Grinders and Accessories

• Powerful 1/18 HP, 3450 RPM motor.
• 8.25" x 9.25" work surface
• 14 inch-ounces breakdown torque.
• Long-lasting 3/4" plated grinding head.
• Convenient coolant drain.
• Flexible rubber splash guard.
• Shaft has opening for 1/4" or 1/8" grinder heads (no adapter needed)
• Exclusive built-in accessory drawer.
• 5 Year Warranty

The perfect glass grinder for the artist or hobbyist. The Super Star II is equipped with a powerful motor that eliminates the frustration of working with glass by refusing to slow down when grinding. The strength of the motor combined with our permanently bonded grinding head team up to help glass artists create their work accurately and efficiently. 

• Powerful 1/12 HP, 3450 RPM motor.
• 19 inch-ounces breakdown torque.
• Permanently "bonded" diamond grinding surface on the 3/4" main grinding head and the 1/4" grinding/drilling head.
• Open grid 9¼" x 8¼" work surface.
• Roller-type adjustable straight edge guide.
• Convenient coolant drain.
• Flexible rubber splash guard.
• Shaft has opening for 1/4" or 1/8" grinder heads (no adapter needed)
• Exclusive built-in accessory drawer.
• 5 Year Warranty

The All-Star is the glass grinder of choice for the art glass professional and is the standard all other grinders are judged against. For efficiency, performance, and reliability, there is no finer grinder available today. The All-Star is the only grinder that offers a built-in water pump/mini table which provides a surface to grind very small pieces of glass with a 1/4" grinding head.

• A work surface 20% larger than any other grinder.
• A motor which produces 67% more torque than its nearest competitor (motor speed 1/9 HP, 3560 RPM).
• 42 inch-ounces breakdown torque.
• Permanent split capacitor, high-efficiency motor design, which results in smoother, quieter, vibration-free operation.
• A glass eye shield with 8 X 9 lens that is more scratch-resistant than plastic lens
• Includes a 2nd level mini table for grinding with a 1/4" or 1/8" head
• Includes a 1" main grinding head and a 1/4" grinding/drilling head.
• Open grid 11" x 13" work surface.
• Roller-type adjustable straight edge guide.
• Convenient coolant drain.
• Flexible rubber splash guard.
• Shaft has opening for 1/4" or 1/8" grinder heads (no adapter needed)
• Exclusive built-in accessory drawer.
• 5 Year Warranty

GLASTAR WORK SURFACE

Open grid top plate work surface for
G7, G12, & G14.  Includes insert for 3/4" and 1" bits.
8" x 9"

GLASTAR ALL-STAR WORK SURFACE

Open grid top plate work surface for G8 All-Star Grinder.
11" x 13"

ALL-STAR MINI TABLE

Replacement mini table for the G8 All-Star Grinder.
Only works with the G8 All-Star Grinder 

UNIVERSAL MINI TABLE

For use on G12 & G14 work surface + all Inland machines. Attaches for convenient support when grinding with the 1/4" or 1/8" head. The table's water well supplies enough coolant for approximately 30 minutes of grinding.

GLASTAR G5 STARLET WORK SURFACE

Open grid top plate work surface for G5 Starlet Grinder.
 

GLASS EYE SHIELD SUPPORT

The eye shield support is made to fit all work surfaces (except Glastar G5). Accommodates 1/8" thick glass.

MOLDED EYE SHIELD

Most users prefer this shield to wearing safety glasses because it protects eyes and face from flying glass chips.  Made of hard polycarbonates.

Glastar's grinding heads outperform and outlast all other heads three to one!  The secret is the unique diamond bonding that eliminates peeling, creating a uniform surface that lasts.

4710

4712

4717

4718

4719

Glastar is unable to get products out at the moment. If you are looking for high quality bit like Glastar's, please try Techniglass' Brilliant Bits
# 4710	1" Standard Grinding Head	Temp Out
# 4712	3/4" Standard Grinding Head 100/120  *see note	Temp Out
# 4717	1/4"  Grinding Head	Temp Out
# 4718	1/8"  Grinding Head	Temp Out
# 4719	1/4" & 1/8" Grinding Head Adapter	$ 11.49
# 4771	3/4" Radius Edger Grinding Head 100 Grit	$ 44.79
# 4721	3/4" Radius Edger Grinding Head 220 Grit	$ 44.79
# 4730	1/8" Diamond Glass Drill Bit	$ 20.49
# 4732	1/4" Diamond Glass Drill Bit	$ 20.49
# 4733	3/8" Diamond Glass Drill Bit	$ 23.89

* If you have an All-Star that is over 20 yrs old, 3/4" bits may not work on it.  There is a white piece at the base of the shaft that will keep the 3/4" bit from sliding down.  It will hold the 1" perfectly.  Newer models do not have this problem.

4721/4771

Radius Edger - combines a flat and radius (rounded) edger. Select this for mosaics or when working with exposed glass edges. Use the fine grit radius head to virtually eliminate chipping on decorative mirror edging.