Evenheat Hot Shot Kiln

Evenheat Hot Shot

The Hot Shot combines the space and performance of a large kiln with the convenience of 120V operation. The Hot Shot is very capable and offers the full range of firing operations. Slump it, paint it, fuse it, anneal it. A wonderful kiln for the beginner.

The Hot Shot is equipped with a Set-Pro. 3 button control. This control allows you to set up to 4 changes in temperature, speed and hold times per firing. Firing is automatic.

The control is not limited by pre-set, “in-the-can” programs. Not only does this give you complete control, it also allows you to fire glass from all glass manufactures. As you move from beginner to a more experienced level this added flexibility is worth its weight in gold.

Features, Specifications and Other Fun Stuff

Control Options

The Hot Shot is available with the built-in Set-Pro, 3 button control. Set up to 8 segments per firing. Each segment controls rate of temperature increase or decrease, temperature (setpoint) and temperature hold time.  "On-the-Fly" features allow you to add time, temperature or skip ahead.

The Set-Pro contains no pre-set, performance limiting programs. You're not locked into a firing program that doesn't fit your needs. For the glass artist this means you can fire glass from all manufacturers with confidence and ease.

Firing Chamber Dimensions and Options:

14.5" diameter x 6.5" deep - 0.70 cubic feet, (37cm long x 16.5cm deep - 20 litres).

Voltage and Phase Considerations:

The Hot Shot is designed to work from a typical 120V household receptacle 12A, 1440W.

Suitability:

The Hot Shot is quite capable of all glass related firing up to 1650°F (900°C), such as painting, fusing, slumping, annealing, etc..

It should also be noted at this point, that the Hot Shot is designed to fire a single layer or shelf. The nature of the Hot Shot is to provide heat from the lid elements directly to the shelf containing the glass. Attempting to fire glass below the top shelf is likely to lead to frustration and disappointment. So.....one shelf only. 

The Hot Shot is not really designed to fire Ceramic, Porcelain, Pottery, China or other "ceramic" related materials.

Recommended Kiln Furniture:
    12” Round Shelf

Shipping Weight:
    75 lbs.