|
Stainless Steel molds are designed for slumping or draping and can be reused many times.
Draping Cylinders are designed for slump schedules. They can
be sprayed with boron nitride or heated slightly and coated with
kiln wash.
Casting Rings can withstand high temp firing, but will need kiln or
fiber paper as a separator from the glass. |
4.5" Stainless Steel Draping Cylinder
4.5" Tall
3" wide opening at bottom
Temp Out
|
6.5" Stainless Steel Draping Cylinder
6.5" Tall
3.5" wide opening at bottom
2.65" wide across at top of cone
|
6" Stainless Steel Casting Ring
6"x3"
A stainless steel band curved into a ring and welded together. Designed to be used with kiln paper or fiber paper
to keep the glass from adhering to the steel.
|
10" Stainless Steel Casting Ring
10"x2"
A stainless steel band curved into a ring and welded together. Designed to be used with kiln paper or fiber paper
to keep the glass from adhering to the steel.
|
4.5" Stainless Steel Draping Cylinder
4.5" from top to bottom
3.25" wide opening at bottom
2.625" wide across at top of cone
|
3" Stainless Steel Draping Cylinder
3" from top to bottom
3" wide opening at bottom
2" wide across at top of cone
|
|
|
2" Stainless Steel Draping Cylinder
2" from top to bottom
2" wide opening at bottom
1.5" wide across at top of cone
|
|
(800) 462-1209
